Skip to main content
ROEQ wireless communication to MiR Autonomous Mobile Robots


As most robotic conveyor transport solutions on the market today rely on wifi communication for their operation, any instability in the connection can cause operational inefficiency. A new introduction from RARUK Automation for its range of MiR autonomous mobile robots (AMRs) eliminates this risk. Developed by ROEQ, GuardCom uses proven sensor-based technology innovatively to remove the robot’s reliance on wifi.

GuardCom connects directly with any model of ROEQ top roller modules from RARUK Automation and to the stationary conveyor station. It enables safe, fast, reliable and cost-effective handling and transfer of goods between conveyor stations.

As communication is directly between GuardCom and the top rollers, no complicated and expensive implementation procedure or third-party system is involved.

The basic system comprises of GuardCom and GuardCom Connect which are affixed to the stationary conveyor station and the top roller unit respectively. A minimum complete solution would require two GuardCom and one GuardCom Connect which would enable the AMR to receive goods from destination A and deliver them to destination B.

Additionally, GuardCom safeguards against misplaced or dangling goods, by allowing the user to either programme the system to set off an alarm to alert a human operator to remedy the problem or set the rollers to roll back automatically. A physical guard is also provided to stop goods falling off the conveyor station accidentally.

Communication between the GuardCom modules is a secure and safe wireless connection. GuardCom Connect signals to the stationary conveyor station through the GuardCom that the AMR is in place and ready to receive or deliver goods. The guard is then lowered so transfer can commence. Once the process has been completed the AMR receives another signal to move on to other stations.

GuardCom has been designed to be plug-and-play so it is quick and easy to set up; no costly commissioning time is required. And because GuardCom is a small unit with sensor technology that connects directly with the stationary conveyor station it occupies minimal space by comparison to other solutions. Overall, the system lowers the barrier to automation for any manufacturer or logistics company thanks to its simplicity and low cost.

Want to talk?

For more information about robotics or automation systems contact
RARUK Automation on 01462 670 044 or email us at